3 Legged Thing ALBERT Overview

This bronze 3 Legged Thing Albert 2.0 Tripod is a support system that features three detachable legs and a removable center column. Each leg can be configured as a monopod with up to a 49.4″ height or can be combined with the center column to form a monopod with up to 74.6″ in height.

Tripod heads that are compatible with a 3/8″-16 mount can be connected to the top of the Albert 2.0 Tripod. When configured as a tripod, the Albert 2.0 Tripod supports up to 66.0 lb and measures 16.9″ when folded. Each of its 5-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. As a tripod, it can be set at a minimum height of 4.7″ when its 3-section, push-and-pull rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 48.0″ or 71.6″ with the center column fully raised. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.

For added versatility, the Albert 2.0 Tripod’s three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport.

Use and Handling

• Support system with three detachable legs and removable center column
• Each leg can be configured as a monopod with up to a 49.4″ height or can be combined with the center column to form a monopod with up to 74.6″ height
• As a tripod, supports up to 66.0 lb
• Push-and-pull center column for rapid camera, lens, or sport optic positioning
• Center column D-ring to accommodate ballast for additional stability
• Can be set for a minimum height of 18.9″ or 4.7″ without the center column
• All three legs can be extended in the tripod configuration to obtain a maximum height of 48.0″ or 71.6″ with the center column fully raised
• Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod’s legs instead of above them
• Legs each feature 5 sections with twist locks for rapid deployment and can be independently spread
• Legs can be locked at 23, 55, or 80 angles
• Rubber feet help to enhance stability on a wide variety of surfaces
• Weighs 4.1 lb and measures 16.9″ when all three legs are reversed 180 and folded
• Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil
• Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a table-top tripod
• 3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws
• Carry bag with strap for storage and transport

Construction Details

• Carbon-fiber legs
• 3/8″-16 mount

In the Box

• 3 Legged Thing Albert 2.0 Tripod (Bronze)
• 3 Legged Thing Bootz Replacement Rubber Feet (Set of 3)
• 3 Legged Thing Toolz Multi-Tool
• D-Ring
• Carry Case
• Carry Strap
• Limited 5-Year Warranty

3 Legged Thing ALBERT Specs

General

Legs

Detachable Monopod

Center Column

Packaging Info

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.