Rode Broadcaster Condenser Microphone

For Radio, Broadcasts, and Podcasts

The Rode Broadcaster is a premium large-diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast applications. Its frequency response has been tailored for radio broadcast, podcasting and voice-over applications, with a rich, controlled proximity effect that has made it an industry standard in radio stations the world over. It features an internal pop filter to control plosives and a switchable 75Hz high-pass filter.

Following broadcast tradition, it is an end-address mic with a clip that works with stands or boom arms (available separately). Unlike most mics, it has a special LED that can be used for “On-Air” indication when properly wired to a compatible console. Whereas many mics require an external screen to inhibit jarring “p” and “b” sounds, the Broadcaster has an internal pop filter designed to control such plosives. Being a true condenser mic, the Broadcaster should be connected via an XLR mic cable (available separately) to a mixer channel, mic preamp, or audio device that can supply phantom power.

Internal Pop Filter

The Broadcaster features an internal pop filter, designed to minimize vocal plosive sounds that can overload the microphone capsule and distort the audio output.

High-Pass Filter

In addition to the Broadcaster’s native 20 Hz to 20 kHz response, a selectable high-pass (low-cut) filter at 75 Hz is available to prevent low-end noise such as air conditioners and traffic from being recorded.

On-Air Indicator

The Broadcaster features an innovative “On-Air” indicator on the body that can be wired for external activation by the “Channel On/Mute” function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.

Features at a Glance

• Classic broadcaster-style, end-address mic
• Emphasized proximity effect for robust vocal sound
• Cardioid polar pattern reduces background noise
• HF2 1″ capsule with gold-plated diaphragm
• Internal pop filter reduces plosives
• LED for power status or “On-Air” indication
• Low-noise JFET circuitry
• Switchable voice-tailored 75 Hz low-cut filter
• Rugged stainless steel body
• XLR 3-pin output connector
• Operates on phantom power (24 or 48 VDC)
• Includes mic clip and zipper pouch