Manfrotto MT190XPRO3 Aluminum Tripod Kit with MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System

• Maximum Height of 67.5″
• Folds to 27.7″
• Minimum Height of 8.3″
• Load Capacity: 15.4 lb
• 90 Column Feature
• 3 Leg Sections
• Weighs 5.5 lb
• Quick Power Leg Locks
• 2 x Bubble Levels on Head
• Independent 360 Pan Lock

This kit from B&H combines the Manfrotto MT190XPRO3 Aluminum Tripod with the MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System. The tripod extends to 67.5″, folds to 27.7″, and weighs 5.5 lb, while holding up to 15.4 lb.

Manfrotto’s Quick Power Lock system allows you to completely extend the 3-section legs with just one hand. The rapid center column can be used in standard vertical mode or it can be swung into horizontal position like a boom. With the column in the 90 position, and the legs at their widest angle, the tripod can place your camera only 8.3″ above the ground. This is perfect for macro work or low angle shots. An Easy Link plug is built into the tripod’s spider for adding any of Manfrotto’s flexible or articulated arms to hold lights or reflectors. A rotating bubble level is included just below the head so you can view it regardless of the tripod’s position.

The MHXPRO-BHQ2 XPRO Ball Head is strong enough for most applications and ideally suited for this equally sturdy tripod. The XPRO lets you fine-tune your adjustments, thanks to separate knobs for both the ball and the 360 panning as well as a friction control knob for more exacting placement. The 200PL quick-release clamp and plate allow for quick camera attachment and removal, and two bubble levels let you adjust your camera so the horizon is level. A numbered scale around the base of the head makes repeating exact pans an easy task.

• Manfrotto MT190XPRO3 Aluminum Tripod

  The black, redesigned MT190XPRO3 Aluminum Tripod from Manfrotto builds on the success and popularity of the previous 190 series with professional hardware and convenience features that make it even easier to use than its predecessor.

  Set up is faster than ever with Manfrotto’s Quick Power Lock System that allows you to completely extend the tripod legs with just one hand. Once set up you can use the MT190XPRO3’s rapid center column in standard vertical mode or swing it into horizontal position like a boom with Manfrotto’s 90 Column feature. Enlarged tabs on the individual leg angle selectors allow you to get down to only 3.5″ for macro work with the column in horizontal mode. And once you’re down there you can attach any of Manfrotto’s flexible or articulated arms to hold lights or reflectors via the Easy Link plug built into the tripod’s spider.

  Convenience features include grippy, rubber leg warmers on two legs for cold or inclement weather and a bubble level that rotates so that you can see it easily regardless of the tripod’s position. Finally, Manfrotto’s insistence on form following function has yielded a tripod that you’ll not only be happy to use but you’ll be happy to be seen with, too.

  Fast Setup with QPL The Quick Power Lock (QPL) system is one of the most eye-catching and unique features of the redesigned 190. It is a strong, ultra fast, ergonomic locking system that allows for complete extension of the legs with one hand. 90 Column One of the most innovative aspects of the 190 series is its compactness, which allows for easier portability. The redesigned patented 90 Column is accessible whenever you need it with simple one finger operation. Easy Link Plug The plug allows instant connection between tripod and accessories, such as LED lights for macro photography and DSLR video applications using Manfrotto articulated arms and brackets. Rotating Leveling Bubble The bubble is easy to read, whatever the shape of the head or however the tripod is positioned. Just rotate it towards you for easy viewing. Leg Angle Selectors Each leg has user selection of 4 angles to accommodate uneven ground or rough terrain. The selectors are manufactured according to most innovative ergonomic standards to prevent fingers and nails being trapped in the upper casting. Manfrotto’s Eye to Style and Design Detail The entire shape of the tripod has been modified and made more manageable and stylish. The complete redesign of its functional elements shows a particular attention to aesthetics and details: the brand name, for example, appears in many sections of the new 190, including the two legwarmers made of comfortable rubber to provide a secure grip and prevent the conduction of heat and cold in extreme weather conditions. UPC: 719821364597

• Manfrotto MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System

  Accurately adjust your camera position with the MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System from Manfrotto . Able to hold up to 22 lb, the 1.1 lb ball head is strong enough for most applications and ideally suited for an equally sturdy tripod. The XPRO lets you fine-tune your adjustments, thanks to separate knobs for both the ball and the 360 panning as well as a friction control knob for more exacting placement.

  The 200PL quick-release clamp and plate allow for quick camera attachment and removal, and two bubble levels let you adjust your camera so the horizon is level. A numbered scale around the base of the head makes repeating exact pans an easy task.

  UPC: 719821378297

In the Box

• MT190XPRO3 Aluminum Tripod
• Limited 2-Year Warranty
• Limited 8-Year Warranty Extension upon Online Product Registration

• MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System

Manfrotto 190XPRO3 specs

• Manfrotto MT190XPRO3 Aluminum Tripod
  

  General
  Load Capacity	15.4 lb / 7 kg
  Maximum Working Height	63″ / 160 cm
  Max Height without Center Column	53.2″ / 135.1 cm
  Minimum Working Height	3.5″ / 8.9 cm
  Folded Length	23.2″ / 58.9 cm
  Head Mount Type	3/8″-16 Screw
  Weight	4.3 lb / 2 kg
  Materials	Aluminum Alloy
  Bubble Level	Rotating

  Legs
  Leg Lock Type	Flip Lock
  Independent Leg Spread	Yes
  Leg Sections	3
  Leg Diameter	Not specified by manufacturer
  Tripod Feet Features	Rubber, Without Spikes

  Center Column
  Center Column Sections	1
  Center Column Extension Type	Rapid
  Lateral / 90-Degree Center Column	Yes

  Packaging Info
  Box Dimensions (LxWxH)	25.8 x 5.4 x 5.3″

• Manfrotto MHXPRO-BHQ2 XPRO Ball Head with 200PL Quick-Release System
  

  Load Capacity	22 lb (10 kg)
  Quick Release	Yes
  Bubble Level	Yes, 2 bull’s eye
  Friction Control	Yes
  Separate Panning Lock	Yes
  Pan Range	360
  Tilt Range	-90 / +40
  Tripod Mount Thread Size	3/8″-16 with 1/4″-20 bushing adapter
  Height	4.5″ (11.5 cm)
  Weight	1.1 lb (500 g)

  Packaging Info
  Box Dimensions (LxWxH)	5.3 x 4.9 x 3.5″

All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.